Course List

This course covers all the requirements, for the below units of competency using a contextualised assessment method, and real life scenarios.

RIIWHS204E Working safely at heights
RIIWHS202E Enter and work in confined space
MSMWHS217 Gas test atmospheres

This unit of competency specifies the mandatory work health and safety training required prior to undertaking construction work.  The unit requires the person to demonstrate personal awareness and knowledge of health and safety legislative requirements in order to work safely and prevent injury or harm to self or others.

The course runs for approximately 4.5hrs (depending on the number of participants).  

Course are run on regular basis, or on request!  Flexibility around rosters, and no minimum numbers required!

This course includes the below units of competency:
PUAFER005 Operate as part of an emergency control organisation
PUAFER008 Confine small emergencies in a facility

This unit describes the skills and knowledge required to perform cardiopulmonary resuscitation (CPR) in line with the Australian Resuscitation Council (ARC) Guidelines.  This unit applies to all workers who may be required to provide CPR, in a range of situations, including community and workplace settings.

Course are run on regular basis, or on request!  Flexibility around rosters, and no minimum numbers required!

This unit covers the skills and knowledge required to provide a first aid response to persons in line with the first aid guidelines determined by the Australian Resuscitation Council.  
Our HLTAID011 Provide first aid course also includes the units of competency listed below:
HLTAID009 Provide cardiopulmonary resuscitation
HLTAID010 Provide basic emergency life support

Course are run on regular basis, or on request!  Flexibility around rosters, and no minimum numbers required!

These units of competency cover the skills and knowledge required to work with an issued permit and to observe permit work.  The people that this course may be required for are 'permit recipients' or 'permit holders' by some industries.  These units of competency apply to persons who are required to conduct work activities under the authority of an issued permit to work and within the requirements of that permit.

MSMPER200 Work in accordance with an issued permit
MSMPER201 Monitor and control work permits
MSMPER202 Observe permit work

Course are run on regular basis, or on request!  Flexibility around rosters, and no minimum numbers required!

This short covers the units of competency listed below:

MSMPER200 Work in accordance with an issued permit
MSMPER201 Monitor and control work permits
MSMPER202 Observe permit work

MSMWHS201 Conduct hazard analysis
MSMPER300 Issue work permits

This course covers the below units of competency:
MSMWHS217 Gas Test Atmosphere
MSMPER200 Work in accordance with an issued permit
MSMPER202 Observe permit work

Course are run on regular basis, or on request!  Flexibility around rosters, and no minimum numbers required!

This unit of competency relates to the skills and knowledge required to move loads using cranes and gantries.  It applies to all operators who will be required to plan and apply the correct methods to secure and move the loads safely without damage to the load, personnel or equipment.

Before undertaking this unit with Queensland Training and Development, relevant experience in Perform Dogging or a high risk work license, will be required.

Course are run on regular basis, or on request!  Flexibility around rosters, and no minimum numbers required!

This unit of competency covers the skills and knowledge required to test the working atmosphere, using electronic test apparatus, to find out if it safe for the proposed work.  It applies to situations where an individual may be required to carry out gas testing of an atmosphere prior to entering a specific area or workspace.  It is suitable for use, but not limited to, the following situations:
- Confined Spaces
- Hot Work
- Testing as part of issuing a work permit
- Holding the gas tester by hand

Course are run on regular basis, or on request!  Flexibility around rosters, and no minimum numbers required!

This unit of competency covers the knowledge and skills that are required to administer restricted analgesics to provide pain management as part of a medically supervised first responder organisation.  This unit is applicable for personnel from emergency services, volunteer organisations or organisations that provide a medically supervised first aid service.  

Pre-Requisite Unit: HLTAID011 Provide First Aid

Course are run on regular basis, or on request!  Flexibility around rosters, and no minimum numbers required!

This unit describes the skills and knowledge required to operate a forklift to shift, lift, transfer and place loads.  It includes using forklift attachments safely and effectively.  This unit applies to those working in site-based roles.
The work required in this unit relates to, but does NOT provide a High Risk Work licence.

Course are run on regular basis, or on request!  Flexibility around rosters, and no minimum numbers required!

This unit describes the skills and knowledge required to conduct lock risk in the resources and infrastructure industries.
It applies to those working in operational roles.  

This unit replaces RIIRIS402D Carry out the risk management process.  It includes the knowledge and skills required to carry out risk management processes including; planning, identifying hazards, assessing risk and developing and implementing risk control.
Those working in supervisory roles and overseeing and auditing the risk assessment process, may find this unit applicable.

It is beneficial to hold RIIRIS301E, RIIWHS301E & RIICOM301E prior to completing this course.

Course are run on regular basis, or on request!  Flexibility around rosters, and no minimum numbers required!

This unit covers the skills and knowledge required to isolate and access plant in the resources and infrastructure industries.
It applies to those working in operational roles who undertaken work such as determining coordination requirements of isolating plants, dealing with energy sources and immobilisation of potential energy sources.
Lock and tag procedures, permits and returning plant to service.

This course is run over a duration of one day, but duration may differ depending on numbers in the course as well as previous experience and knowledge of the participants.
 

This unit describes a participant's skills and knowledge required to test operational functions of vehicles and equipment in the coal mining, extractive and metalliferous mining sectors.  This unit is appropriate for those working in operational roles.

Course are run on regular basis, or on request!  Flexibility around rosters, and no minimum numbers required!

This course is beneficial for those working in operational roles, that require the operation of light vehicles on a worksite.  This course also includes a defensive driving component.

Course are run on regular basis, or on request!  Flexibility around rosters, and no minimum numbers required!

This combined course includes criteria out of both RIIVEH201E Operate light vehicle and RIIVEH305F Operate and maintain four wheel drive vehicles.  These units apply to those working in operational roles across numerous industries, including mining, civil construction, drilling, and infrastructure.

Course are run on regular basis, or on request!  Flexibility around rosters, and no minimum numbers required!

This unit applies to those personnel working in operational roles.  This unit covers the skills and knowledge that a person requires to operate a medium vehicle in the resources and infrastructure industries.

This unit describes the skills and knowledge required to operate and maintain a four wheel drive vehicle in the resources and infrastructure industries.  It applies to those working in supervisory and technical specialist roles within the mining, civil, infrastructure and resources industries.

Course are run on regular basis, or on request!  Flexibility around rosters, and no minimum numbers required!

This unit describes the skills and knowledge required to enter and work in confined spaces in the resources and infrastructure industries.  It applies to those working in operational roles where they are required to enter or work around confined spaces.

Course are run on regular basis, or on request!  Flexibility around rosters, and no minimum numbers required!

This unit describes the skills and knowledge required to work safely at heights in the resources and infrastructure industries.  It applies to those working in operational roles in the mining, civil, drilling and other relevant industries.

Course are run on regular basis, or on request!  Flexibility around rosters, and no minimum numbers required!

This course is structured to suit the needs of personnel required to work at heights and enter and work in confined spaces.  This course combines the unit of competency criteria, of both RIIWHS202E and RIIWHS204E, and is run in conjunction with each other.
These units of competency are applicable to those working in operational roles, within the Mining, Construction and Infrastructure Industries.

Course are run on regular basis, or on request!  Flexibility around rosters, and no minimum numbers required!

This unit describes the skills and knowledge required to supervise work in confined spaces in the resources and infrastructure industries.  It applies to those working in Supervisory roles that are generally responsible for the output of others, contribute to the development of technical solutions to non-routine problems and apply management plans to the workplace.

Courses are run on request at our classrooms or onsite at your location.
Pre-requisites apply: RIIWHS202E Enter and work in confined space and MSMWHS217 Gas Test Atmosphere

Standard 11 Surface Induction Skill Set - this skill set of 6 x mandatory units of competency is designed to introduce new and existing mine workers to the induction requirements of recognised Standard 11 in the Coal Mining Resource Sector for the purpose of maintaining a standard of safety.  Theory will be conducted in the classroom with the student required to complete a Worksite Verification Booklet onsite prior to their Statement of Attainment being issued.
- RIICOM201E Communicate in the workplace
- RIIERR205D Apply initial response First Aid
- RIIERR302E Respond to local emergencies and incidents
- RIIGOV201E Comply with site work processes/procedures
- RIIRIS201E Conduct local risk control
- RIIWHS201E Work safely and follow WHS policies and procedures

Course are run on regular basis, or on request!  Flexibility around rosters, and no minimum numbers required!



 

Standard 11 Surface Induction Skill Set Refresher - this skill set of 6 x mandatory units of competency is designed to introduce new and existing mine workers to the induction requirements of recognised Standard 11 in the Coal Mining Resource Sector for the purpose of maintaining a standard of safety.  
- RIICOM201E Communicate in the workplace
- RIIERR205D Apply initial response First Aid
- RIIERR302E Respond to local emergencies and incidents
- RIIGOV201E Comply with site work processes/procedures
- RIIRIS201E Conduct local risk control
- RIIWHS201E Work safely and follow WHS policies and procedures

Course are run on regular basis, or on request!  Flexibility around rosters, and no minimum numbers required!

Standard 11 Surface/Underground Induction Skill Set Refresher - this skill set of 7 x mandatory units of competency is designed to introduce new and existing mine workers to the induction requirements of recognised Standard 11 in the Coal Mining Resource Sector for the purpose of maintaining a standard of safety.  
- RIICOM201E Communicate in the workplace
- RIIERR205D Apply initial response First Aid
- RIIERR302E Respond to local emergencies and incidents
- RIIGOV201E Comply with site work processes/procedures
- RIIRIS201E Conduct local risk control
- RIIWHS201E Work safely and follow WHS policies and procedures
- RIIERR203E Escape from hazardous situations unaided

Course are run on regular basis, or on request!  Flexibility around rosters, and no minimum numbers required!

Standard 11 Surface/Underground Induction Skill Set - this skill set of 7 x mandatory units of competency is designed to introduce new and existing mine workers to the induction requirements of recognised Standard 11 in the Coal Mining Resource Sector for the purpose of maintaining a standard of safety.  Theory will be conducted in the classroom with the student required to complete a Worksite Verification Booklet onsite prior to their Statement of Attainment being issued.
- RIICOM201E Communicate in the workplace
- RIIERR205D Apply initial response First Aid
- RIIERR302E Respond to local emergencies and incidents
- RIIGOV201E Comply with site work processes/procedures
- RIIRIS201E Conduct local risk control
- RIIWHS201E Work safely and follow WHS policies and procedures
- RIIERR203E Escape from hazardous situations unaided

Course are run on regular basis, or on request!  Flexibility around rosters, and no minimum numbers required!

The Supervisor & Carry out the risk management process (G2) course is designed to cover the application of the processes and tasks to conduct inspections and to identify, analyse, assess risks, recommend treatment, contribute to implementation of treatments and to monitor risks.  It also covers participation in the preparation, testing and documentation of site working instructions or equivalent.  The units of competency that this course covers are listed below:
- RIIRIS301E Apply risk management processes
- RIIWHS301E Conduct safety and health investigations
- RIICOM301E Communicate information
- RIIRIS402E Carry out the risk management process

The Supervisor course is designed to cover the application of the processes and tasks to conduct inspections and to identify, analyse, assess risks, recommend treatment, contribute to implementation of treatments and to monitor risks.  It also covers participation in the preparation, testing and documentation of site working instructions or equivalent.  The units of competency that this course covers are listed below:
- RIIRIS301E Apply risk management processes
- RIIWHS301E Conduct safety and health investigations
- RIICOM301E Communicate information

This unit of competency covers the knowledge and skills required to enter the rail corridor.  It includes taking appropriate safety precautions to:
- access the danger zone
- access the rail corridor
- respond appropriately in an emergency

Course are run on regular basis, or on request!  Flexibility around rosters, and no minimum numbers required!

UETDRMP007 Perform rescue from a live LV Panel covers the performance of rescue procedures from live low voltage (LV) apparatus, not including overhead lines and underground cables in the workplace.  It specifies that mandatory requirements of rescue from a live LV panel and how they apply in the context of transmission, distribution or rail work functions.
HLTAID009 Provide cardiopulmonary resuscitation describes the skills and knowledge required to perform cardiopulmonary resuscitation (CPR) in line with the Australian Resuscitation Council (ARC) Guidelines.

Pre-Requisite units apply - need to be able to produce your Electrical Licence or complete Pre-Req Unit

UETDREL006 Work safely in the vicinity of live electrical apparatus as a non-electrical worker

The course duration is between 4-6 hours depending on experience and the number of participants in the room.

Course are run on regular basis, or on request!  Flexibility around rosters, and no minimum numbers required!

This qualification reflects the role of first medical response workers or volunteers who provide initial care to patients.  These people provide basic first aid and emergency responses in the pre-hospital/out-of hospital environment.

This qualification reflects the role of emergency response and rescue team members working in the resources and infrastructure industries, who perform tasks involving a broad range of skilled applications in a wide variety of contexts, which involve some discretion and judgement in selecting equipment, services or contingency measures.

This qualification reflects the role of pathology collectors.  Workers in this role follow known routines and procedures, taking responsibility for their own work under general supervision.  They combine communication, customer service and technical skills, and use discretion and judgement to adapt and transfer their skills to different situations.
To achieve this qualification, the candidate must have completed at least 35 hours of work as detailed in the Assessment Requirements of units of competency.

This qualification reflects the role of employees such as production operators in a metalliferous processing facility or a coal preparation and treatment plant, who perform tasks involving a broad range of skilled applications in a varied work context, using some discretion and judgement in selecting equipment, services or contingency measures.